Drills to Improve IM Transitions

In the Individual Medley (IM), swimmers are judged not just on how fast they swim each of the four strokes, but on how efficiently they move from one stroke to the next. Ask any experienced IM swimmer or coach where races are won and lost, and the answer is rarely "in the middle of the fly leg" — it's almost always at the walls. The transitions between butterfly and backstroke, backstroke and breaststroke, and breaststroke and freestyle are where fractions of a second compound into full seconds, and where technical breakdowns under fatigue can undo an otherwise strong swim.
Unlike a single-stroke race, where a swimmer only has to execute one turn technique repeatedly, the IM demands four different skill sets and three unique transition patterns within a single race (plus, in the 400 IM, the added challenge of executing these transitions while significantly fatigued). Each transition has its own rules, its own body positioning challenges, and its own common errors. The good news is that all of these can be isolated, drilled, and improved with focused practice.
This article breaks down each IM transition individually, explains the technical demands and rules governing it, and provides a full set of drills — along with a sample practice structure — that coaches and swimmers can use to sharpen this often-neglected part of medley swimming.
Why IM Transitions Deserve Dedicated Practice Time
Many age-group and even collegiate programs spend the majority of their IM-specific practice time on stroke technique and pacing, treating the turns as an afterthought — something swimmers will "figure out" through repetition in main sets. The problem with this approach is that turns performed at the end of a tiring 200 or 400 IM look very different from turns performed fresh. If a swimmer has never deliberately drilled the mechanics of, say, the breaststroke-to-freestyle transition under fatigue, they'll default to whatever sloppy habit feels easiest in the moment — often costing hip position, wall contact, or an extra breath that kills momentum off the wall.
Additionally, each of the three transitions has explicit rule requirements from swimming's governing bodies (FINA/World Aquatics, USA Swimming, etc.) around hand touches, body position, and stroke initiation. Missing these technicalities can result in disqualification, which makes technical mastery not just a matter of speed but of race legality.
Breaking transitions into drillable components lets swimmers build muscle memory for each piece — approach, touch, rotation, wall contact, push-off, breakout — so that under race fatigue, the body can execute on autopilot rather than needing conscious thought.
Transition 1: Butterfly to Backstroke
The Technical Demands
The fly-to-back transition is widely considered one of the more physically demanding turns in the IM because it requires a swimmer to touch the wall with two hands simultaneously (as fly finishes require), then quickly rotate the body from a prone (face-down) position to a supine (face-up) position before pushing off on the back.
The main technical challenges are:
Maintaining fly tempo and stroke length into the wall rather than gliding and losing speed
Touching with two hands at, or near, the same time and at an appropriate height (not too high, not too low)
Executing a fast rotation onto the back without a pause at the wall
Getting the hips up and the body into a strong streamline position for the backstroke push-off
Staying legal — many disqualifications happen here when a swimmer's shoulders pass vertical toward backstroke before the touch, or when they leave the wall on their stomach
Drills for Fly-to-Back
1. Wall Touch and Rotate (Stationary Drill) Have swimmers start at arm's length from the wall, simulate the two-hand fly touch, then practice rotating explosively to a back-streamline position without pushing off. This isolates the rotation mechanic with no swimming fatigue involved. Repeat 10–15 times per set, focusing on speed of rotation and getting the hips to the surface quickly.
2. 15-Meter Fly Approach + Turn Starting 15 meters from the wall, swimmers sprint fly into the wall at full speed, execute the transition, and push off doing 5 meters of backstroke underwater kick before surfacing. This teaches swimmers to carry speed into the wall rather than decelerating, which is one of the most common mistakes in this transition.
3. No-Breath Final Stroke Drill Many swimmers take an unnecessary breath on the final fly stroke into the wall, which drops the hips and slows the approach. Practice approaching the wall with the head down on the last one or two strokes, initiating the touch without lifting to breathe. This keeps the body long and fast into the transition.
4. Underwater Dolphin Kick Off the Back Wall Because the push-off from this transition is on the back, swimmers should drill their underwater dolphin kick specifically off a backstroke push. Have them push off in streamline and count kicks to the 15-meter mark (or wherever their program's underwater limit is), focusing on tight core engagement and minimal kick amplitude for maximum propulsion.
5. Broken 25s: Fly-Turn-Back Swim 12.5 meters of fly, execute the wall transition, then swim 12.5 meters of backstroke. Repeat for a set of 8–10 with short rest. This combines the touch, rotation, and underwater phase into one continuous drill that mimics race conditions without the full fatigue of a longer swim.
Transition 2: Backstroke to Breaststroke
The Technical Demands
This is generally regarded as the most technically complex of the three IM transitions, and it's also the one most scrutinized by officials because it involves a full rotation from supine to prone combined with a strict touch requirement.
Under current rules, swimmers must touch the wall while on their back — the moment any part of the body (other than in the course of a normal stroke) turns past vertical toward the breast before the touch, it risks disqualification. After the touch, the swimmer can then rotate to breaststroke position and must push off in a manner consistent with breaststroke rules (one arm pull to the hip, one dolphin kick permitted before the breaststroke kick begins, followed by the pull-out sequence).
Key technical elements:
Maintaining backstroke speed and not slowing down in anticipation of the turn
Touching the wall while still on the back (not prematurely rotating)
A fast, tight rotation to the front after the touch
Executing a legal breaststroke pull-out with proper timing (pull, breaststroke kick, then the first stroke)
Getting maximum distance and speed off the wall using the underwater pull-out phase, since breaststroke has no true "underwater dolphin kick" phase like the other three strokes
Drills for Back-to-Breast
1. Backstroke Flags Awareness Drill Since swimmers cannot see the wall on their back, precise counting of strokes from the backstroke flags is essential to avoid crashing into the wall or misjudging the touch. Have swimmers count their strokes from the flags to the wall at both race pace and a slightly faster tempo (since swimmers often speed up on the final lap), and have them practice touching with a fully extended arm at the flag-count they've identified.
2. Touch-and-Spin Drill From a stationary position at the wall, have swimmers practice touching with one hand while on their back, then executing a fast spin to a prone position with the second hand still near the wall for the push. This isolates the rotation speed without the complexity of an approach.
3. Pull-Out Perfection Drill Because breaststroke has no dolphin-kick underwater phase, the single legal pull-out becomes disproportionately important for maintaining speed off this wall. Have swimmers push off from a streamline (starting both on the wall and, separately, mid-pool to simulate wall push speed), execute one dolphin kick, then a full pull to the hips, followed by a single breaststroke kick before breaking out. Repeat for volume — 10 to 15 reps — with a coach or teammate checking legality and timing of the kick-pull sequence.
4. Broken 25s: Back-Turn-Breast Similar in structure to the fly-to-back broken 25, swim 12.5 meters of backstroke into the wall, execute the transition, then swim 12.5 meters of breaststroke, emphasizing a strong pull-out. This is one of the highest-value drills for this transition because it combines every element under mild fatigue.
5. "No Early Rotation" Drill with a Coach Cue Because premature rotation is the single most common disqualification risk in this transition, have a coach or teammate stand at the wall and call out or visually signal if the swimmer's shoulders rotate before the hand touches. Doing this at slow-to-moderate speed repeatedly builds the habit of touching flat before rotating, which will hold up even at race speed.
Transition 3: Breaststroke to Freestyle
The Technical Demands
Compared to the other two, the breaststroke-to-freestyle transition has fewer strict legality concerns (breaststroke touches must be with two hands simultaneously at, or near, the same level, but freestyle has no specific starting position requirement). This makes it more of a pure speed-and-technique transition than a rules-compliance one — which means the swimmers who drill it well can gain a genuine competitive advantage.
Key technical elements:
A strong, non-decelerating final breaststroke pull into the wall
A simultaneous two-hand touch
An explosive push off the wall into a streamline
A strong underwater dolphin kick (freestyle allows an underwater phase, typically to the 15-meter mark under most competition rules) before breaking out into the front crawl
Timing the breakout stroke to happen as speed from the underwater phase begins to fade, not before
Drills for Breast-to-Free
1. No-Glide Final Stroke Drill Breaststroke swimmers often glide too long on their final stroke into the wall, killing their approach speed. Drill a shortened, quicker final stroke cycle directly into the wall — cutting the glide phase short — so speed is maximized at the moment of the touch.
2. Push-and-Kick Explosiveness Drill From a two-hand wall touch, have swimmers explode into a streamline push-off and count dolphin kicks to a fixed distance (10 or 15 meters depending on the swimmer's underwater strength and competition rules). Time these efforts and track improvement over the season — this is one of the most trainable and highest-return skills in the entire IM.
3. Breakout Timing Drill Many swimmers either break out too early (before the underwater kick has lost its speed advantage) or too late (wasting time gliding without propulsion). Have swimmers do repeated push-offs where they consciously vary the number of kicks before breaking into freestyle — for example, 4 kicks vs. 6 kics vs. 8 kicks — and use a coach's stopwatch or video to identify the optimal breakout point for that individual swimmer.
4. Broken 25s: Breast-Turn-Free Swim 12.5 meters of breaststroke, execute the transition, then swim 12.5 meters of freestyle at race effort. This is especially useful late in practice, when some fatigue is present, to simulate how this transition feels at the end of a 200 or 400 IM.
5. Reverse IM Order Drill An underrated way to drill all three transitions is to occasionally swim the IM strokes in reverse order (free-breast-back-fly) or in mixed pairings during practice. This forces the brain and body to adapt to transition mechanics in a non-habitual sequence, which paradoxically strengthens the swimmer's overall transition awareness and adaptability, rather than allowing them to swim the standard order purely on autopilot.
General Turn Mechanics That Apply Across All Three Transitions
While each transition has unique demands, there are several underlying mechanical principles that, when drilled, improve all three simultaneously.
Wall Approach Speed. In all three cases, swimmers tend to decelerate as they approach the wall, either out of habit or because they're judging distance late. Marking approach distances with tape or cones during practice, and drilling swimmers to accelerate (not coast) into every wall, pays dividends across all transitions.
Hip and Core Rotation Speed. Both the fly-to-back and back-to-breast transitions rely heavily on how quickly a swimmer can rotate their hips and core from one body position to another. General dryland work — such as medicine ball rotational throws, cable rotations, and rapid-rotation core circuits — supports faster in-water rotation and should be considered a complementary training tool alongside pool-based drills.
Underwater Kick Strength. Every transition (except the pull-out-limited breaststroke) benefits from a powerful, well-timed underwater dolphin kick. Devoting separate sets purely to underwater kick strength and endurance — such as 25s of pure underwater dolphin kick off each wall — builds a foundation that supports every transition in the IM.
Breath Control. Across all transitions, swimmers who take an unnecessary breath in the final stroke or two before the wall lose body position and speed. Practicing "no breath" final strokes into every wall, regardless of which stroke is being swum, builds a habit that will show up automatically in racing.
Sample Practice Set Incorporating All Three Transitions
Coaches looking to build a dedicated IM transition practice might structure a main set like this:
Warm-up: 400 easy swim, mixing strokes, plus 200 kick with fins.
Transition Isolation Block: 8 x 25 alternating between fly-to-back touch-and-rotate drill, back-to-breast touch-and-spin drill, and breast-to-free push-and-kick drill (done stationary/short distance, focus purely on mechanics).
Broken 25 Series: 6 x (12.5m Fly + transition + 12.5m Back) on a moderate interval, followed by 6 x (12.5m Back + transition + 12.5m Breast), followed by 6 x (12.5m Breast + transition + 12.5m Free). Rest 15–20 seconds between reps within each set of six.
Full Transition 50s: 6 x 50 IM order (fly/back or back/breast or breast/free, rotating through), swum at race pace with full attention on the transition technique, not just overall time.
Simulated Race Rounds: 2–3 x 100 IM or 200 IM (depending on training phase) at race pace or slightly above, with a coach specifically observing and giving feedback on each transition afterward.
Cool-down: 200 easy choice.
This structure moves from isolated mechanics to increasingly race-like conditions, which mirrors best practices in motor learning — swimmers build the skill in a low-fatigue, high-repetition environment before applying it under race-like fatigue and speed.
Common Mistakes to Watch For
Even with dedicated drilling, certain errors tend to recur and are worth flagging specifically for coaches and swimmers:
Decelerating into the wall. This is the single most common and most costly mistake across all three transitions. Swimmers should be taught to accelerate their stroke rate in the final 5 meters before every wall.
Premature rotation on the back-to-breast turn. As covered above, this is both a speed issue and a legality issue, and deserves the most drilling attention of the three transitions.
Weak or absent underwater kick after the breaststroke pull-out and freestyle push-off. Many age-group swimmers under-utilize the underwater phase simply because it's tiring to execute well; dedicated underwater kick sets address this directly.
Inconsistent stroke count to the wall on backstroke. Because swimmers can't see the wall, an inconsistent stroke count leads to either an early, weak touch or a full-speed crash into the wall — both of which cost time and, in the crash scenario, can cause injury.
Breathing on the final stroke before a touch. This tiny habit compounds across a race and is one of the easiest things to fix once a swimmer is made aware of it.
Conclusion
The Individual Medley rewards swimmers who treat it as four short races connected by three critical skill moments, rather than as one long swim with incidental turns. Because each transition — fly-to-back, back-to-breast, and breast-to-free — has its own technical requirements, rules considerations, and common failure points, each deserves dedicated, isolated drill work rather than being left to develop passively through general IM training.
By breaking transitions down into their component skills (approach speed, touch mechanics, rotation speed, push-off power, underwater kick, and breakout timing) and drilling each piece deliberately — as outlined in the drills above — swimmers can convert what is often a weakness into a genuine strength. In a race where the margin between finishing on the podium and finishing fourth is frequently a fraction of a second, the time reclaimed at the walls may matter more than almost anything else in an IM swimmer's training program.






Comments